___________________________________________________ ___________________________________________________ ___________________________________________________ _____ custom power design electronics consultants providing custom design , development, test & support ___________________________________________________ ___________________________________________________ ___________________________________________________ _____ tel: + 44 (0)118 930 2299 a division of smet ltd fax: +44 (0 )118 930 2206 ___________________________________________________ ___________________________________________________ ___________________________________________________ _____ www.custompsudesign.com unit 19, t he markham centre, station road, theale, berks. rg7 4pe. custom@custompsudesign.com ___________________________________________________ ___________________________________________________ _____________________________________ smet limited. registered in england & wales, number 6760677. registered .office: bell house, ashford hill road, ashford hi ll, berks. rg19 8bb. vat no. (gb) 944 0645 24 440 watt battery converters output 12v input 24v input 36v input 48v i nput 13.8v at 32a (12v) sm3707 sm3703 sm 4220 sm4225 27.6v at 16a (24v) sm3702 sm3706 sm4221 sm4226 41.4v at 10.7a (36v) sm3708 sm3709 sm422 8 sm4229 55.2v at 8a (48v) sm3704 sm3705 SM4222 sm4227 ___________________________________________________ ___________________________________________________ ___________________________________________________ __________________________ very high conversion efficiency. high output power in compact size. charge another battery at 12, 24, 36 or 48v. use 12v or 24v or 36v or 48v equipment. remote on / off control. low battery alarm with auto shut-off . general description: a rugged converter, generatin g 13.8v or 27.6v or 41.1v or 55.2v dc (lead acid floa t voltages), capable of powering most battery equipment when sup plied from 12, 24, 36 or 48v batteries with up to 440 watts of continuous power. the output has a constant current characteristic so that lead acid batteries may be charged to provide a dual voltage system. the unit incorporates an electronic relay to turn i t on/off remotely, driven by a control input, which may be s upplied from any low current switch. the input and output are ohmically isolated, making installation very simple. input can be isolated from chassis by up to 100v. the unit is packaged in a powder coated folded meta l box. input wires enter on one side face, and an outlet termina l block is mounted on the top face. flanges are provided for mounting at each end. caution: this adaptor is supplied on the basis of the user determining the suitability for the purpose for whi ch it is to be used. do not use in a moving vehicle without the co nsent of the vehicle manufacturer. do not use for aviation or m arine applications without our written agreement. do not use for life dependent applications. the negative input lead is connected to case unless specified as isolated at time of purcha se. s pecification: battery input battery by model. nominal voltage: 12v or 24v or 36v or 48v input voltage range: nominal C 11.7% to +16.7% current, no load: 0.5a, 0.4a, 0.3a and 0.25a. efficiency (approximate): 85% low battery alarm: c nominal C 12.5% battery low latch off: c nominal C 20% float output nominal voltage: 12v . 24v . 36v . 48v . output voltage 0.15%: 13.8v. 27.6v. 41.4v. 55.2v current limit 5%: 33a. 17a. 11.4a . 8.5a power, nominal: 440 watts. general protection : over-current and short circuit output limit plus input fusing. size: 247mm x 103mm x 63mm. weight: 1200 grams. storage temp range: -40 to +70c. operating temp range: -40 to +40c. manufacturer made in uk. ___________________________________________________ ___________________________________________________ ___________________________________________________ __________________________ smet ltd. manufactures a range of battery to ac mai ns inverters, with quasi- sinewave output. output power ranges from 120w to 2.7kw. we offer a custom design service covering dc-dc and dc-ac power units. call the sales office for details. we reserve the right to change this specification without notice. document 3702-993
|
